What should I pay attention to when modifying the suspension system of Buick Excelle?

  • This topic is empty.
Viewing 1 post (of 1 total)
  • Author
    Posts
  • #79960
    admin
    Keymaster

      Buick Excelle modified suspension system needs to pay attention to these
      aspects.

      First of all, the choice of springs, pay attention to their strength and
      length, which is the key part of the suspension system and determines the
      dynamic balance of the car. The sports springs used for modification can usually
      lower the body by about 35mm, increase the elastic coefficient by about 30%,
      enhance the anti-roll force, reduce weight transfer, and increase the cornering
      limit. If the body height is reduced within 25mm and the strength is increased
      by 15% after the spring is replaced, the original shock absorber can be used,
      which can save money, improve handling and maintain ride comfort.

      If the strength and length of the new spring meet the standard, you have to
      replace the matching shock absorber to give full play to the system
      performance.

      In addition, Buick Excelle suspension modification can choose springs, shock
      absorbers or air suspension. The selection of springs and shock absorbers is
      relatively simple, and high-quality parts should be selected to ensure safety.
      The air suspension selection requires complete modification, involving
      operations such as replacing the base components and removing the compressor,
      which can automatically adjust the height and enhance stability and
      stability.

      When modifying pneumatic shock absorbers, you must find a professional to
      install and adjust them, otherwise it will damage the product. It is also
      necessary to use and maintain it correctly, and pay attention to the quality of
      product accessories, such as air pump failure and computer instability. AIRBFT
      special airbags have a lot of natural rubber components and a high fatigue rate.
      They can be used normally for 3 to 5 years without any problems and have been
      strictly tested.

      Be careful that excessive hardening of the suspension is not good, which will
      cause the frame to twist, accelerate aging, and even cause traffic accidents.
      For HellaFlush style modifications, the central idea is Offset is everything,
      such as using an outward offset value wheel hub, making the distance between the
      wheel eyebrow and the wheel hub small, using narrow tires with wide wheels and
      paying attention to the tire stretching effect, etc., all of which test the
      technician's level.

      In short, Buick Excelle's modified suspension system should be considered
      comprehensively from many aspects and operated with caution.

      http://www.topshineparts.com
      Topshine Auto Parts Manufacturer

    Viewing 1 post (of 1 total)
    • You must be logged in to reply to this topic.